Top-Quality Steering Cylinders For Chinese Truck Parts

Steering Cylinder

Because there are many kinds of spare parts, we can't display them all on the website. Please feel free to contact us for specific ones.

advantage

1. We supply both original and aftermarket products for you 2. From the manufacturer to the customer directly, saving your cost 3. Stable stock for normal parts 4. In Time Delivery Time, with competitive shipping cost 5. Professional and on time after service

packing

Carton Boxes, or according to clients’ request.

description

The power steering hydraulic cylinder is prone to failure if it is not inspected and maintained in time. The hydraulic cylinder does not suck or suck oil, but the oil has no pressure. This failure is mainly due to clogging of the filter element and the oil pipeline due to the rubber being not resistant to oil corrosion; leakage at the pipeline connection part, air entering; the pump parts are worn and the gap is too large, so the leakage is large, and the pumping oil has no pressure; the oil does not meet the regulations, and the viscosity If it is too large, the sliding resistance of the blade is large, and the oil level in the oil storage tank is too low. At this time, use alcohol to clean the filter element, replace the pipeline, and change the oil; check and tighten the connections to prevent air from entering; repair the booster hydraulic pump and replace the severely worn parts; replace the hydraulic oil that meets the specified price of the hydraulic cylinder; refuel to the specified Oil level. The excessive noise of the hydraulic cylinder may be caused by air entering the pump; or the pressure shock may be too large, the safety valve may be damaged or out of function, or the pressure may be adjusted too high; it may also be caused by high oil suction resistance; excessive pump wear. Check the tightness of each joint to prevent air from entering; check and repair the safety valve, and the pressure should be adjusted to 13MPa; replace the oil suction pipe; disassemble and check the booster hydraulic pump and replace the severely worn parts. The shaft of the power steering hydraulic cylinder is broken because it is killed in one direction and stayed for too long in use. Therefore, in use, care should be taken not to kill the direction and stay for too long. The hydraulic oil of the hydraulic cylinder is leaking seriously. If it is found that the liquid level of the oil storage tank drops quickly and the hydraulic cylinder is supplemented with more hydraulic oil during use, it should be taken seriously. If the hydraulic oil supplement is too large, the reasons should be found from the following aspects: damage to the connecting oil pipes, loose joints, leakage; oil tank damage, hydraulic oil leakage; damage to the steering gear oil seal, large hydraulic oil leakage, and steering hydraulic pump oil seal Damaged, hydraulic oil flows into the engine crankcase. If such a fault is found, the engine should be stopped immediately to prevent the hydraulic oil of the hydraulic cylinder from mixing into the engine oil, causing the oil to deteriorate and causing the engine bearing bush to fail.

Steering Cylinder for Chinese Brand Truck spare parts

Products Details

Steering Cylinder

advantage

packing

description

Featured Products

Contact us