Factory Direct Rear Taillight For Chinese Brand Trucks - Genuine Spare Parts For Better Performance

Rear tail light

Because there are many kinds of spare parts, we can't display them all on the website. Please feel free to contact us for specific ones.

Advantage

1. We supply both original and aftermarket products for you 2. From the manufacturer to the customer directly, saving your cost 3. Stable stock for normal parts 4. In Time Delivery Time, with competitive shipping cost 5. Professional and on time after service

Packing

Carton Boxes, or according to clients’ request.

description

The meaning of the color of truck tail light: The yellow one is the turn signal, the working mode is flashing, and it is controlled by the switch behind the left hand of the steering wheel; The white one is the reversing light, the working mode is continuously on, it lights up when you enter reverse gear, and it goes out when you exit reverse gear; There are three types of red ones, namely, driving lights, brake lights, and fog lights, all of which are continuously lit in working mode; In the general automotive electrical wiring system, the brake light circuit is red, the front fog light is yellow or transparent, and the rear fog light is red. They are all pressed on the bottom of the bumper, and the parking light and the brake light are together. , But it can only be turned on when the engine is working. The reversing light is white, and the tail light refers to the turning light, brake light and reversing light of the driving car as a whole. The wiring method of the rear lights of the truck is as follows: 1. Make sure that the wires at the rear end of the wiring harness are not short-circuited, especially between the ground wire and the ground wire. First, connect the ground wire of the tail light on one side (such as the right side) with the ground wire in the wiring harness (car The middle line is stipulated to be black, and it can also be measured with a multimeter); 2. Then turn on the key to turn the turn signal switch to the right turn, use the test light or rear tail light to find the line that can make the bulb light up (the turn signal is flashing), and then use the found line to touch the rear tail lights respectively When the right rear turn signal is on, connect the live wire in the middle and wrap it up; 3. Turn off the turn signal, and then turn on the small light. Use the same method to connect and wrap the small light; find the brake light and reversing light in turn; if there is a rear fog light, connect it to the rear fog; 4. Attention should be paid to the latter, when the small light is turned on, the fog light will only turn on after turning on the rear fog light switch. Connect the left light in the same way, you can also do left and right at the same time, but when connecting the left turn signal, you need to turn the turn signal switch to the left.

Rear taillight for Chinese Brand Truck spare parts

Products Details

Rear tail light

Advantage

Packing

description

Featured Products

Contact us